,
created with Netscape Composer and last updated on 25 July 2019. Copyright
© 1999-2019 Karl A. Petersen.contact SACAstore@steamautomobile.com
These prices were in effect 01/05/2002. The drawing sets are now only available in packages from the address above.
| P93A Engine, 15 drawings | $50.00 |
| Cylinder Vent Drawings
(with engine drawing set) |
$7.50
$5.00 |
| Collection of MODELTEK magazine articles by Peter Barrett:
Steam generator construction, steam outlet accessories, temperature control equipment, schematic layout, etc. (photocopies) |
$20.00 |
| Throttle Drawings, drawn by Peter Barrett's son, Philip | $15.00 |
| Centrifuge Drawings | $25.00 |
| Right Angle Gearbox Drawings | $20.00 |
| Combustion Chamber Drawings (full size) | $20.00 |
| Spinning Cup Burner Drawings (timing belt driven) | $20.00 |
| Electronic Water Pump Controller Drawings by Glen Eggen | $20.00 |
| High Pressure Lubrication Injection Pump Drawings | $20.00 |
| Centrifugal Fuel Metering Pump Drawings | $20.00 |
| Building the Combustion Chamber Video
(outside the continental USA) |
$25.00
$30.00 |
This page powered by